WhatsApp +86 176 2154 1688Sales online · reply within 12 hours

How to Read Bearing Part Numbers: Series, Bore Codes and Suffixes

A practical guide to decoding bearing numbers such as 6205-2RS C3, 6902ZZ and MR85 — series, bore code, seals, clearance and precision suffixes explained with examples.

3 min readBy Precision Bearing Factory Engineering TeamPublished Updated
Key takeaways
  • The first digit(s) give the bearing type and series; the last two digits usually give the bore code.
  • For bore codes 04 and above, multiply by 5 to get the bore in millimetres (6205 → 25 mm).
  • Suffixes describe seals (ZZ, 2RS), clearance (C3) and precision (P5) — always include them in an RFQ.

A bearing number is a compact specification. Once you know the pattern you can read the type, size, sealing and internal clearance straight from the part number — and write RFQs that suppliers cannot misinterpret. This guide uses the ISO numbering system that almost every manufacturer follows.

The structure of a bearing number

Most rolling bearing numbers follow the pattern prefix + basic number + suffix. The basic number identifies the type, the dimension series and the bore. Prefixes and suffixes add details such as material, seals, cage, clearance and precision.

PartExampleMeaning
PrefixS6205S = stainless steel rings and balls
Type62056 = single-row deep groove ball bearing
Series62052 = light diameter series (62)
Bore code620505 × 5 = 25 mm bore
Suffix6205-2RS C3Two rubber seals, C3 radial clearance

Decoding the bore code

The last two digits of the basic number are the bore code. The rule is simple but has four exceptions:

  • 00 = 10 mm, 01 = 12 mm, 02 = 15 mm, 03 = 17 mm
  • 04 to 96: multiply by 5 — 6204 has a 20 mm bore, 6210 a 50 mm bore.
  • Single digit (608, 625, 693): the last digit is the bore in mm — 608 has an 8 mm bore.
  • Bore / number (62/22): the number after the slash is the bore in mm.

Miniature bearings often use a different style: MR85 means a metric miniature bearing with 5 mm bore and 8 mm outside diameter; R8 is an inch bearing with a 1/2" bore.

Series: why 6005, 6205 and 6305 are different

All three have a 25 mm bore, but the outside diameter and width grow with the series number: 6005 is 25×47×12 mm, 6205 is 25×52×15 mm and 6305 is 25×62×17 mm. Larger series use bigger balls and carry more load. Thin-section series 67, 68 and 69 go the other way — 6805 is only 25×37×7 mm — which is why they are popular in bicycle hubs and robot joints.

Common suffixes and what they mean

SuffixMeaning
Z / ZZOne / two non-contact metal shields
RS / 2RSOne / two rubber contact seals
N / NRSnap-ring groove / groove with snap ring
C2, C3, C4Radial internal clearance smaller / larger than normal
P6, P5, P4ISO precision class (ABEC-3, -5, -7)
KTapered bore (1:12) for adapter sleeves
M, MBMachined brass cage
CEFull ceramic (common trade usage)

Writing an RFQ that gets accurate quotes

Quote requests fail when only the basic number is given. A good RFQ includes the full designation with suffixes, the quantity per order and per year, the application, any required grease or noise level, packaging and marking needs, and the target delivery date. If you only have an old bearing, measure the bore, outside diameter and width with calipers and photograph the markings on the shield — we can usually identify the part from that.

Need help decoding a number from a drawing? Send it to our engineers and we will confirm the exact equivalent.

Frequently asked questions

What does 2RS mean on a bearing?

2RS means the bearing has two rubber contact seals, one on each side, that protect against dust and moisture.

How do I calculate the bore size from a bearing number?

For bore codes 04 and above, multiply the last two digits by 5. Codes 00, 01, 02 and 03 equal 10, 12, 15 and 17 mm.

What does C3 mean?

C3 indicates a radial internal clearance larger than normal, used when the bearing runs warm or is mounted with a tight fit.

Keep reading

More engineering notes

All articles

Request a quotation

Get a Free Quote Today

Send bearing numbers, drawings or a photo of your sample. Our sales engineers reply with price, MOQ and delivery time within 12 hours.

Send Your Inquiry

Sales engineers online · reply within 12 hours

Products in your inquiry list