- Specify the full designation, material, grease, noise grade and packaging — not just the size.
- Approve samples against your drawing, then lock the specification for production.
- Ask for batch inspection data and agree the packaging and marking before shipment.
China produces a large share of the world’s rolling bearings, from commodity wheel bearings to ABEC-7 dental bearings. The difference between a good and a bad sourcing experience is usually the RFQ, not the factory location. Use this checklist before you send yours.
The 12-point RFQ checklist
- Full designation including suffixes, e.g. 6204-2RS C3 P6 Z2V2.
- Dimensions d × D × B and any special tolerances.
- Material — GCr15 chrome steel, 440C, ZrO2, Si3N4.
- Cage — steel, brass, nylon, PEEK.
- Seal or shield type and material.
- Clearance (C2, C0, C3, C4).
- Precision class and noise/vibration grade.
- Grease type and fill percentage.
- Quantity per order and estimated annual volume.
- Marking and packaging — neutral, private label, tube, box, pallet.
- Inspection requirements and documents (CoC, material certificate, test report).
- Incoterms and destination — FOB Shanghai, CIF, DDP.
Evaluate samples properly
Measure samples against the drawing, check running noise by hand and on a vibration tester if possible, and run them in the real application. Once approved, record the sample number so production matches it exactly.
Protect yourself from mismatched parts
Avoid suppliers who promise major-brand bearings at a fraction of the price — counterfeit branded bearings are a real problem. Buying a clearly identified factory brand or private-label product with documented specifications is safer than buying “original” bearings without traceability.
Inspection and shipping
Ask for a pre-shipment inspection report with dimensional results and photos of packaging and marking. Agree carton labelling, pallet height and moisture protection (VCI bags, desiccant) before production, especially for sea freight.
Lead times
Standard sizes often ship from stock in 3–7 days. Production orders typically take 15–35 days depending on size, quantity and special requirements. Custom bearings to drawing need extra time for samples.
Ready to quote? Send your RFQ — we reply with price, MOQ and lead time within 12 hours on working days.
Frequently asked questions
What is a typical MOQ for bearings?
For standard sizes from stock there is often no MOQ beyond a carton. For custom bearings or private-label packaging, MOQs depend on size and usually start from a few hundred to a few thousand pieces.
Which Incoterms do you offer?
EXW, FOB Shanghai, CIF and DDP to many countries, by sea, air or express courier.




