WhatsApp +86 176 2154 1688Sales online · reply within 12 hours

ZZ vs 2RS vs Open Bearings: Choosing Shields and Seals

How ZZ metal shields, 2RS rubber seals, RZ non-contact seals and open bearings differ in friction, speed, protection and maintenance — with a selection table.

3 min readBy Precision Bearing Factory Engineering TeamPublished Updated
Key takeaways
  • ZZ shields: low friction and high speed, moderate dust protection, poor water protection.
  • 2RS seals: best protection against dust and water, slightly higher friction.
  • Open bearings: for oil lubrication or where an external seal protects the bearing.

The closure on a ball bearing decides how long the grease stays inside and how much dirt gets in. Choosing the wrong one is one of the most common causes of early bearing failure.

The options

ClosureContactFrictionSpeedDustWater
Open—LowestHighestNoneNone
ZZ (2Z)Non-contact metalLowHighGoodPoor
2RZNon-contact rubberLowHighGoodFair
2RS (2RS1)Contact rubberHigherLowerVery goodVery good

When to use ZZ

Metal shields leave a tiny gap to the inner ring, so they add almost no friction. They suit electric motors, fans, power tools and indoor machinery where speed matters and there is little water.

When to use 2RS

Rubber contact seals press lightly on the inner ring and keep out water, slurry and fine dust. They are the right choice for wheels, bicycles, agricultural machinery, pumps and anything washed down. Expect a lower limiting speed — typically 60–70% of the ZZ version.

When to buy open bearings

Open bearings are used where the bearing is oil-lubricated (gearboxes), where an external seal protects it, or where the customer adds a special grease. Many skate and reel bearings are bought open or with removable seals so they can be cleaned.

Seal materials and temperature

Standard 2RS seals are nitrile rubber (NBR), good from about −30 to +110 °C. For higher temperatures or aggressive chemicals, FKM (Viton) seals are available on request; PTFE seals are used on some ceramic bearings.

Browse deep groove ball bearings in ZZ and 2RS versions, or tell us your environment and we will recommend the closure.

Frequently asked questions

Is 2RS better than ZZ?

2RS is better for protection against water and dust; ZZ is better for low friction and high speed. The best choice depends on the environment.

Can I remove a ZZ shield?

Metal shields can be removed with care for cleaning, but are usually damaged in the process. Rubber seals are easier to remove and refit.

Keep reading

More engineering notes

All articles

Request a quotation

Get a Free Quote Today

Send bearing numbers, drawings or a photo of your sample. Our sales engineers reply with price, MOQ and delivery time within 12 hours.

Send Your Inquiry

Sales engineers online · reply within 12 hours

Products in your inquiry list